Quick diagnosis
What this code is telling you
Most likely trigger
wash motor unable to run
Recommended replacement
Dishwasher Wash Motor
Diagnostic path
3 ordered checks
Part fit
Exact model number required
Safety first
Before opening the appliance
Disconnect electrical power before removing panels or handling internal components. Do not bypass safety devices or perform live electrical testing unless you are qualified to do so.
Read the full safety disclaimerRoot cause
Why the control reported this error
F7E2 indicates a wash-motor fault because wash motor unable to run. motor wiring fault and control-board motor output fault can produce the same code, so verify the fault before replacing components.
Possible causes
Check the most likely causes first
- 1
wash motor unable to run
Start here when it matches your symptoms.
- 2
motor wiring fault
- 3
control-board motor output fault
Diagnostic sequence
Work through these checks in order
Stop when you find the fault. Do not perform a step that requires skills or live testing you are not qualified to do.
- 1
Check 1
Power-cycle the dishwasher for 30 seconds.
- 2
Check 2
Restart a cycle.
- 3
Check 3
If F7E2 returns, request service for the wash-motor circuit.
Replacement part reference
Dishwasher Wash Motor
Exact OEM part number
Model number required
Fitment note
The exact OEM part number varies by model and production revision. Verify the complete model number before ordering.
Verify the appliance model before ordering.
Manufacturers can use different parts under the same error code across model families and production revisions.
Where do I find my model number? →FixCodeDB may earn a commission from qualifying purchases made through affiliate links.
Common questions
Quick answers for this fault
What should I check first for F7E2?
Start with wash motor unable to run. If that checks out, continue through the diagnostic sequence above rather than replacing a part based on the code alone.
Does F7E2 always mean Dishwasher Wash Motor is bad?
No. An error code identifies the condition the control detected, not a guaranteed failed part. Confirm the likely causes and wiring first. The exact OEM part number varies by model and production revision. Verify the complete model number before ordering.
When should I stop troubleshooting F7E2 myself?
Stop if the next step requires live electrical testing, sealed-system work, gas or combustion service, or any procedure outside your training. Disconnect electrical power before removing panels or handling internal components. Do not bypass safety devices or perform live electrical testing unless you are qualified to do so.
Manufacturer reference
Verify against the official support source
FixCodeDB summarizes the fault in plain language. For model-specific instructions, confirm the guidance with the manufacturer and your appliance manual.
Whirlpool Dishwasher Error Codes — Whirlpool Product Help →Was this useful?
Did these checks help with your Whirlpool F7E2 error?
Keep diagnosing
Related Whirlpool guides
F6E1 indicates a user-interface or main-control communication fault.
F8E4 indicates that water has been detected in the dishwasher drip tray.
F9E1 indicates that the dishwasher is taking too long to drain or is not draining.
H2O indicates that the dishwasher is not detecting incoming water.
Different problem?
Search another code or symptom
Go back to the main diagnostic search and try the code, symptom, appliance, component, or brand.
Open diagnostic search →