Quick diagnosis
What this code is telling you
Most likely trigger
temporary control fault
Recommended replacement
Dishwasher User Interface / Control
Diagnostic path
3 ordered checks
Part fit
Exact model number required
Safety first
Before opening the appliance
Disconnect electrical power before removing panels or handling internal components. Do not bypass safety devices or perform live electrical testing unless you are qualified to do so.
Read the full safety disclaimerRoot cause
Why the control reported this error
F6E1 indicates a user-interface or main-control communication fault because temporary control fault. user-interface failure and main control or harness problem can produce the same code, so verify the fault before replacing components.
Possible causes
Check the most likely causes first
- 1
temporary control fault
Start here when it matches your symptoms.
- 2
user-interface failure
- 3
main control or harness problem
Diagnostic sequence
Work through these checks in order
Stop when you find the fault. Do not perform a step that requires skills or live testing you are not qualified to do.
- 1
Check 1
Disconnect dishwasher power for 30 seconds.
- 2
Check 2
Restore power and restart the cycle.
- 3
Check 3
If F6E1 returns, request service for the control system.
Replacement part reference
Dishwasher User Interface / Control
Exact OEM part number
Model number required
Fitment note
The exact OEM part number varies by model and production revision. Verify the complete model number before ordering.
Verify the appliance model before ordering.
Manufacturers can use different parts under the same error code across model families and production revisions.
Where do I find my model number? →FixCodeDB may earn a commission from qualifying purchases made through affiliate links.
Common questions
Quick answers for this fault
What should I check first for F6E1?
Start with temporary control fault. If that checks out, continue through the diagnostic sequence above rather than replacing a part based on the code alone.
Does F6E1 always mean Dishwasher User Interface / Control is bad?
No. An error code identifies the condition the control detected, not a guaranteed failed part. Confirm the likely causes and wiring first. The exact OEM part number varies by model and production revision. Verify the complete model number before ordering.
When should I stop troubleshooting F6E1 myself?
Stop if the next step requires live electrical testing, sealed-system work, gas or combustion service, or any procedure outside your training. Disconnect electrical power before removing panels or handling internal components. Do not bypass safety devices or perform live electrical testing unless you are qualified to do so.
Manufacturer reference
Verify against the official support source
FixCodeDB summarizes the fault in plain language. For model-specific instructions, confirm the guidance with the manufacturer and your appliance manual.
Whirlpool Dishwasher Error Codes — Whirlpool Product Help →Was this useful?
Did these checks help with your Whirlpool F6E1 error?
Keep diagnosing
Related Whirlpool guides
F7E2 indicates a wash-motor fault.
F8E4 indicates that water has been detected in the dishwasher drip tray.
F9E1 indicates that the dishwasher is taking too long to drain or is not draining.
H2O indicates that the dishwasher is not detecting incoming water.
Different problem?
Search another code or symptom
Go back to the main diagnostic search and try the code, symptom, appliance, component, or brand.
Open diagnostic search →