Brand diagnostic hub
Samsung appliance error codes
Search 49 Samsung diagnostic guides across 6 appliance types. Start with the appliance category or search the code or symptom directly.
Diagnostic search
Find the exact guide you need
Search by brand, appliance, error code, symptom, likely cause, or replacement part.
49 guides found
Code 3C
The dishwasher reports 3C when the pump is not operating correctly.
Code 3E
3E means the incoming water supply is too hot for the dishwasher.
Code 4C / 4E
The dishwasher is not receiving water at the pressure or temperature it expects.
Code 5C / SC / 5E / SE
The dishwasher cannot drain water normally.
Code 7E
The Waterwall reflector is not able to move correctly on compatible Samsung dishwashers.
Code 9E
9E indicates that the dishwasher does not have enough water for the cycle.
Code bE / 6E
The control panel has detected a button that appears to be stuck.
Code CE
The control panel cannot communicate with the rest of the dishwasher electronics.
Code HC
HC indicates that the dishwasher is detecting excessive internal temperature.
Code HE
HE indicates that dishwasher temperature is being detected incorrectly during heating.
Code LC / LE
The dishwasher leak sensor has detected moisture in the base area.
Code OC / 0C / oE
The dishwasher has detected more water in the tub than expected.
Code PC
The Zone Wash function is not operating correctly.
Code PE
The dishwasher is not performing the Half Load function correctly.
Code tE
The dishwasher is detecting an incorrect internal temperature reading.
Code 3C
Samsung identifies 3C as a dryer motor error.
Code 9C1 / 9E / 2E / 9E1
These Samsung dryer codes indicate that the control is detecting abnormal incoming supply voltage.
Code AC / AE / Et
The dryer control cannot communicate correctly with one or more internal electronic components.