Appliance diagnostic hub
Oven / Range error codes
Search 25 Oven / Range diagnostic guides across 8 brands, or choose a manufacturer to narrow the database.
Brands with Oven / Range guides
Diagnostic search
Find the exact guide you need
Search by brand, appliance, error code, symptom, likely cause, or replacement part.
25 guides found
Code E011
E011 indicates a key on the control console panel has been pressed or stuck closed for longer than 30 seconds.
Code E300
E300 triggers when the main control board fails EEPROM checksum verification or loses system coding data.
Code F10
F10 indicates the control board senses oven temperature rising above safe limits or heating uncontrollably.
Code F30
F30 triggers when the control board loses connection with the oven temperature sensor harness.
Code Bad Line
Bad Line appears when the range or oven detects incorrect electrical wiring at the power connection.
Code F0 / F1 / F6 / F7
GE documents F0, F1, F6, and F7 as keypanel-related faults on applicable ranges and wall ovens.
Code F2 / F20
F2 or F20 indicates that oven temperature exceeded a preset safety threshold.
Code F3 / F4
GE documents F3 and F4 as oven-temperature-sensor faults on applicable ranges and wall ovens.
Code F30
Code F30 indicates the electronic control board senses an open circuit (infinite resistance) in the oven sensor circuit.
Code F350
F350 indicates a problem in the upper cooling-fan circuit or an obstruction affecting that fan.
Code F5
GE says F5 usually indicates an electronic-control problem.
Code F8 / FF
GE documents F8 and FF as electronic-control faults on applicable ranges and wall ovens.
Code F9
GE says F9 usually indicates a failure somewhere in the oven door-lock circuit.
Code F90
F90 indicates the electronic control failed to verify the door lock mechanism position during self-clean cycle.
Code FC
GE says FC usually indicates a failure somewhere in the door-lock circuit.
Code FD
FD usually means the temperature probe or its receptacle may require service.
Code F11
F11 indicates the electronic oven control board senses a shorted button on the touch panel.
Code F2 E1
F2 E1 alerts that the control board is not detecting keypress matrix signals from the touch panel membrane.