Appliance diagnostic hub
Dryer error codes
Search 15 Dryer diagnostic guides across 3 brands, or choose a manufacturer to narrow the database.
Brands with Dryer guides
Diagnostic search
Find the exact guide you need
Search by brand, appliance, error code, symptom, likely cause, or replacement part.
15 guides found
Code d80
d80, d90, or d95 indicates 80%, 90%, or 95% airflow restriction in the home exhaust vent system.
Code d90
d90 means the dryer has detected an exhaust restriction of about 90 percent through its Flow Sense monitoring.
Code d95
d95 means the dryer has detected an extremely severe exhaust restriction of about 95 percent through Flow Sense monitoring.
Code 3C
Samsung identifies 3C as a dryer motor error.
Code 9C1 / 9E / 2E / 9E1
These Samsung dryer codes indicate that the control is detecting abnormal incoming supply voltage.
Code AC / AE / Et
The dryer control cannot communicate correctly with one or more internal electronic components.
Code bE / bE2 / bC2 / 6E
The dryer has detected a control-panel button that appears to be stuck or continuously pressed.
Code C80
C80 indicates that the dryer vent-blockage test detected roughly an 80 percent airflow restriction.
Code C90
C90 indicates that the dryer vent-blockage test detected a severe restriction of more than roughly 90 percent.
Code dC / dE / dF / do
These Samsung dryer codes indicate that the door, latch, or door-position sensing circuit is not being confirmed as securely closed.
Code FC / FE
The dryer is detecting an invalid incoming power-source frequency.
Code HC / hE / HC4
The dryer is detecting an abnormal heating condition, commonly excessive temperature caused by restricted airflow.
Code HC2
Samsung identifies HC2 as a gas-ignition error on compatible gas dryers.
Code tC / tE / tE3
These codes indicate an abnormal dryer temperature reading or a problem in the temperature-sensing circuit.
Code E1 F3
E1 F3 error indicates an open electrical circuit in the dryer thermistor temperature sensor.