Appliance diagnostic hub
Combination Washer / Dryer error codes
Search 15 Combination Washer / Dryer diagnostic guides across 1 brand, or choose a manufacturer to narrow the database.
Brands with Combination Washer / Dryer guides
Diagnostic search
Find the exact guide you need
Search by brand, appliance, error code, symptom, likely cause, or replacement part.
15 guides found
Code E1
The washer cannot drain the water within the expected time.
Code E13
Haier associates E13 with lint buildup in the combination washer/dryer.
Code E2
The unit cannot lock the door within the expected time.
Code E4
The selected water level was not reached within the expected time.
Code E8
The water level has exceeded the warning level.
Code Err1
The combination washer/dryer does not detect the door as fully closed.
Code Err2
The unit is not draining water normally.
Code Err5
The unit is not sensing a complete water fill.
Code F7
F7 indicates a motor-circuit fault.
Code F9
F9 indicates a fault in the dryer sensor circuit.
Code FA
FA indicates a problem in the water-level sensing circuit.
Code FC
FC means the main control is not receiving the expected feedback signal from the drive unit.
Code Fd
Fd means the drying heater system is operating abnormally.
Code FE
FE means the dryer motor operation is abnormal.
Code Unb
Unb indicates that the wash load is unbalanced.